JMU IT has instructions for connecting to the JMU-Official-Wireless network from macOS and Windows here:

https://www.jmu.edu/computing/internet-and-network/official-wireless.shtml

If you're running Linux then use the following settings:

• SSID: JMU-Official-Wireless
• Wireless security: WPA & WPA2 Enterprise
• Authentication: Protected EAP (PEAP)
• Anonymous identity: <leave blank>
• Domain: <leave blank>
• CA certificate: /etc/ssl/certs/ca-certificates.crt
• PEAP version: Version 0
• Inner authentication: MSCHAPv2
• Username: <your JMU e-ID>
• Password: <your JMU password>

This should work on most Linux distributions though the path to the CA certificate file could be different or you may need to use a different one altogether.

For a more automated connection setup, you can use the eduroam SSID and the eduroam CAT tool. Read the JMU IT webpage for eduroam.

1. Go to https://cat.eduroam.org
2. Choose 'James Madison University'
3. Download the Linux Installer
4. Run the Python script that you receive
5. Click Ok
6. Click Yes
7. Enter eID@jmu.edu where eID is your JMU e-ID.
8. Enter your JMU e-ID password
9. You may need to tell Mint to attempt to connect to eduroam

You will need to re-run this every time your password updates.

Note: some of these settings may differ slightly on different Android devices

	
- Click the Settings icon on your Android device
- Click Connections and click to turn on WiFi
- Go back to your Home screen and you will see Wi-Fi network available, click to Open Wi-Fi network available
- Select JMU-Official-Wireless and set the following settings:
  - EAP Method: PEAP
  - Identity: type in your eID
  - Password: enter your password
  - CA Certificate: Use System Certificates 
  - Online Certificate Status: leave this as Don't Validate
  - Domain: jmu.edu
- Click Connect